Forklift Training Programs Prince Albert

Forklift Training Programs Prince Albert - Are you looking for work as a driver of a forklift? Our regulatory-compliant mobile equipment operator training provides instruction in kinds of lift trucks, pre-shift inspection, fuel kinds and dealing with fuels, and safe operation of a lift truck. Hands-on, practical training helps those participating in obtaining basic operational skills. Program content covers current regulations governing the use of forklifts. Our proven forklift courses are meant to provide training on these kinds of trucks: powered pallet truck, narrow isle forklift and counterbalanced forklift.

How to Safely Handle Loads

Do not raise or lower the fork when the lift truck is traveling. A load must not extend above the backrest due to the danger of the load sliding back toward the operator. Check for overhead obstacles and make sure there is plenty of clearance prior to raising a load. Stay away from overhead power lines. When the load is lifted straight up, tilt it slightly back.

The lift truck is less stable if a load is in a raised position. Ensure that no body ever walks underneath the elevated fork. The operator should not leave the forklift when the load is raised.

The forks must be level when handling pallets, and high enough to extend all the way into and beneath the load. The fork's width should provide even weight distribution.

Prior to loading or unloading the truck, set the brakes and chock the wheels. Floors have to be strong enough to support the weight of the forklift and the load combined. Fixed jacks could be installed to support a semi-trailer that is not attached to a tractor. The entrance door height must clear the height of the forklift by at least 5 cm. Edges of rail cars, ramps and docks must be marked and avoid them.

Do not stay in a lift truck for long periods without right ventilation. The interior of the truck must be properly lighted and free of loose objects, obstructions and trash. Check for holes in the floor. The installation of nonslip material on the floor would help prevent slipping. Clear whatever obstacles from dockplates and docks and ensure surfaces are not wet or oily.

Forklifts should not be utilized to tow or push other forklifts.

Click to Download the pdf