Forklift Training School Prince Albert

Forklift Training School Prince Albert - Forklift Training School - For The Safety Of Both The Equipment And The Operator - Federal and industry regulators have established the criteria for forklift safety training based on their existing standards and regulations. People wishing to utilize a forklift must finish a forklift training program before making use of one of these machines. The accredited Forklift Operator Training Program is intended to offer trainees with the practical skills and knowledge to become an operator of a forklift.

Mobile Equipment and Vehicle safety rules which apply to forklift utilization involve pre-shift checks, and rules for loading and lifting.

An inspection checklist should be done and given to the supervising authority before starting a shift. When a maintenance problem is uncovered, the utilization of the specific machine should be discontinued until the problem has been dealt with. To indicate the machine is out of order, the keys have to be removed from the ignition and a warning tag placed in a visible location.

Loading safety rules consist of checking the rating capacity on the forklift nameplate and determining if the weight of the load falls within capacity. The forklift forks must be in the down position when the forklift is starting up. Remember that there is a loss of about 100 pounds carrying capacity for every one inch further away from the carriage that the load is carried.

Lifting should start with the driver moving to a stopped position around three inches away from the load. The mast should then be leveled until it has reached a right angle with the load. Raise the forks to one inch beneath the slot on the pallet and drive forward. Next lift forks four inches. Tilt back the load to secure it for moving. Drive the lift backwards if the load obscures frontal vision. Check behind and honk in order to alert other staff. Never allow forks to drag on the ground.

Click to Download the pdf